Image
Byrne Engineering Inc. based in Burlington, Ontario, Canada - Structural Mechanical Electrical Engineering Byrne Engineering Inc. brings you a world of possibilities...
Image
Discover what's new at our firm
Image
Image

Learn more about Byrne Engineering Inc. on this page Byrne's Extensive Sector Specific Experience: Mining  

 

 

 

 

Byrne Engineering Inc.
Tel 905-632-8044
Toll-free 1-888-67Byrne

Full contact details


 

 

Projects Below Ground

 

Byrne has experience with many multi-disciplinary projects below ground. 

The following are some of Byrne's recent projects:

Client: CVRD-Inco

Project: Return Air Exhaust Fans for Ventilation Capacity Upgrade at the Coleman Mine

An upgrade in the ventilation capacity inside the Coleman Mine was required to accommodate the work being performed in the mine. Two surface exhaust fans were to be installed at two return air raises to increase the mines capacity. All engineering services were provided for design, installation and commissioning.  Equipment installed as part of this ventilation system include the fans, structural supports, communications equipment and vibration monitoring equipment.  

Return Air Raise at the Coleman Mines

Owner: CVRD-Inco

 

Client: CVRD-Inco

Project: Remotely Controlled Locomotive Modifications

Battery powered locomotives used in the hauling of ore required modifications due to problems in the drive and braking systems. Byrne modified the hydraulic braking system to reduce the harshness of braking when the unit is controlled remotely, as well as revising hydraulic components locations for easier access.  The DC drive controller was also replaced with a new design incorporating fully dynamic braking to reduce loads on system components.  A complete maintenance and troubleshoot manual was developed.

 

Return Air Raise at the Coleman Mines

Owner: CVRD-Inco

 

Other below ground projects...

Client: CVRD-Inco

Project: Review of Systems and Procedures at the North Mine

  • CVRD-Inco requested Byrne to perform a review of all the systems and procedures used at the north mine site for hoist rope replacement, rope cutting and conveyance.  The entire sheave system was examined with procedures documented and anchorages and lifting devices were checked to determine their ability to accommodate design loadings.

Client: CVRD-Inco

Project: Creighton Mine Sewage Treatment Plant Upgrade

  • Structural, mechanical and electrical services provided for work to convert the plant to a sewage settling plant.  Complete redesign of the new settling chamber, including design of a new air tight roof, sealing of the tank and water proofing the entire system.  Mechanical work included installing two sewage transfer pumps and discharge piping. Electrical work included incorporating electrical unit heaters, pump starters and sludge level sensors and transmitters.

Client: CVRD-Inco

Project: Creighton Mine, 6800L Picking Belt Chute Assessment

  • Inspections to determine any corrosion, structural and mechanical concerns.

 

Please contact Byrne Engineering Inc. for a brochure of our mining experience.

^See above ground projects

^Back to mining home

^ Top of page
 

     
     

© Copyright 2005 Byrne Engineering Inc. All rights reserved.